针对地质灾害隐患点的无人机航摄像控点布点方案     

吴波  李俊  蒋大鹏  冯志 《测绘通报》2020,(6):125

以陕西省某地质灾害隐患点1∶2000航飞生产任务为背景，本文结合垂直起降式无人机航摄技术特点和地质灾害隐患点区域实际情况，通过详细对比几种无人机航摄像控点布控方案的优劣，研究无人机像控点布设方案对空三加密精度的影响，总结了适用于不同地质灾害隐患点的像控点布设方案。通过本文研究，为今后制定地质灾害隐患点的无人机航摄像控点布设方案提供了参考依据。  相似文献   

精密单点定位结合EGM2008模型在新疆某河地质断面测量中的应用     

李玉平 《测绘与空间地理信息》2020,(1):192-195

针对新疆某河地质断面测量范围大、测区通行困难、测量部位分散、传统控制测量方法工作量大且效率低的问题,在测区每条断面上布设断面基点作为控制点并用GNSS接收机静态观测(无需同步),选用武汉大学开发的Trip2.0软件加载事后精密星历和精密钟差等信息解算静态观测数据得到ITRF框架下的三维坐标,然后采用TBC软件加载EGM2008超高阶地球重力场模型点校正得到控制点的国家平面坐标和正常高。结果表明,Trip2.0软件计算的三维点位中误差最大为0.066 m,点校正坐标转换残差与已知点差值均满足限差要求;该方法平面控制测量工作量比传统方案减少46%,五等水准测量比传统方案减少98%,节约工期约56%。实践表明,采用该方法可快速地实现测区面积大、测点分散、控制点稀少区域的平面及高程控制测量。  相似文献   

Evaluation of clayed silt properties on the behavior of hydrate production in South China Sea     

《China Geology》2020,3(3):362-368

Gas hydrate is one kind of potential energy resources that is buried under deep seafloor or frozen areas. The first trial offshore production from the silty reservoir was conducted in the South China Sea by the China Geological Survey (CGS). During this test, there were many unique characteristics different from the sand reservoir, which was believed to be related to the clayed silt physical properties. In this paper, simulation experiments, facilities analysis, and theoretical calculation were used to confirm the hydrate structure, reservoir thermo-physical property, and bond water movement rule. And the behavior of how they affected production efficiency was analyzed. The results showed that: It was reasonable to use the structure I rather than structure II methane hydrate phase equilibrium data to make the production plan; the dissociation heat absorbed by hydrate was large enough to cause hydrate self-protection or reformation depend on the reservoir thermal transfer and gas supply; clayed silt got better thermal conductivity compared to coarse grain, but poor thermal convection especially with hydrate; clayed silt sediment was easy to bond water, but the irreducible water can be exchanged to free water under high production pressure, and the most obvious pressure range of water increment was 1.9–4.9 MPa.  相似文献   

Assessing model of highway slope stability based on optimized SVM     

《China Geology》2020,3(2):339-344

Considering the geological hazards attributed to the highway slope, using a common simple model cannot accurately assess the stability of the slope. First, principal component analysis (PCA) was conducted to extract the principal components of six factors (namely, bulk density, cohesion, internal friction angle, slope angle, slope height, and pore water pressure ratio) affecting the slope stability. Second, four principal components were adopted as input variables of the support vector machine (SVM) model optimized by genetic algorithm (GA). The output variable was slope stability. Lastly, the assessing model of highway slope stability based on PCA-GA-SVM is established. The maximal absolute error of the model is 0.0921 and the maximal relative error is 9.21% by comparing the assessment value and the practical value of the test sample. The above studies are conducive to enrich the assessing model of highway slope stability and provide some reference for highway slope engineering treatment.  相似文献   

Sequence stratigraphic framework and sedimentary model of Shanxi Formation in northeast Zhoukou Depression of the North China Plate     

《China Geology》2020,3(4):575-590

The sequence stratigraphic framework of Shanxi Formation in the northeast Zhoukou Depression was established based on detailed sequence stratigraphical and sedimentological analysis by utilizing the logging and core data of six wells drilled in the eastern tectonic unit of Zhoukou Depression. It was divided into three third-order sequences, namely SQs1, SQs2, and SQs3 from bottom to top. Each sequence can be divided into a transgressive system tract (TST) and a highstand system tract (HST). Furthermore, four sequence boundaries and three maximum flooding surfaces were identified, and they are the bottom interface SBs and maximum flooding surface mfss1 of SQs1, the bottom interface SBs1 and maximum flooding surface mfss2 of SQs2, the bottom interface SBs3 and maximum flooding surface mfss3 of SQs3, and the top interface SBx from bottom to top. Carbonate tidal flat –clastic tidal flat sedimentary system developed in Shanxi Formation in the northeast Zhoukou Depression (also referred to as the study area) under the control of regression. Meanwhile, four sedimentary microfacies were identified in the sedimentary system, which are lime-mud flats, sand flats, mixed flats, and mud flats. The transgression in the study area occurred from the southeast to the northwest. Therefore, the northwestern part is the seaward side, and the southeastern part is the landward side. As revealed by relevant drilling data, SQs1 of the Shanxi Formation is characterized by the development of limestone and carbonaceous mudstone, with limestone, dark mudstone, and carbonaceous mudstone mainly developing. Meanwhile, lime-mud flats were mainly deposited in it. During the periods of SQs2 and SQs3, the sedimentary environment of the study area changed from the carbonate tidal flats to clastic tidal flats as the coastline migrated towards the sea. In these periods, sand flats mainly developed near the maximum flooding surfaces and were relatively continuous in the eastern and southern parts of the transgressive system tract; mixed flats were relatively continuous in the western and northern parts of the transgressive system tract as well as the eastern and southern parts of the highstand system tract; mud flats widely developed in the highstand system tract. Peat flats mainly developed in the period of HSTs2, with coal seams relatively developing in the southeastern part of the study area as revealed by drilling data. The peat flats in SQs2 are favorable hydrocarbon source layers, the lime-mud flats in SQs1 and sand flats formed in the transgression periods of SQs2 and SQs3 constitute favorable hydrocarbon reservoirs, and the mud flats form in the transgressions periods serve as favorable cap rocks. Therefore, the study area features a reservoir-cap assemblage for self-generating and self-storing of hydrocarbon, and the southeastern part of the study area can be taken as a favorable exploration area.  相似文献   

两种测高重力异常反演海底地形方法比较     

彭聪  周兴华  王颖 《海洋通报》2020,39(2):223-230

针对基于测高重力异常反演海底地形理论众多、选取标准无法确定的情况,利用中国南海海域内的测高重力异常和船测水深数据研究比较了重力地质法(GGM)和SmithSandwell (SAS)法两种精度高、计算速度相对较快的海底地形反演理论。其中,GGM方法的密度差异常数Δρ由向下延拓技术确定为2.15 g·cm-3,SAS方法采用移去-恢复技术得到反演波段内重力异常和水深数据。结果表明:测线分布条件一定时,水深多在-1 000 m左右或反演区域岛礁、海山等复杂海底地形较多时选取SAS方法,水深主要在-3 000 m以深的区域或海底地形复杂程度不高时选取GGM方法则能获取更好的效果,其效果最优处与船测水深在检核点处的差值最优平均值能达-0.61 m,标准差可达14.67 m。  相似文献   

南海北部海域油气勘探保障建设选址适宜性研究     

武二亮  陈浩东  刘裕光  安永宁 《海岸工程》2020,39(4):256-262

为分析南海北部海域油气勘探保障建设选址的适宜性,在广泛研究备选区特征资料的基础上,基于层次分析法(Analytic Hierarchy Process, AHP)原理,以自然环境因素、开发环境因素、基础设施与投资情况以及其他因素作为一级评判准则,建立了包括12项二级评判准则的递进层次结构模型,并以永兴岛、赵述岛和晋卿岛作为3个假定备选区,来验证分析评价模型的有效性和可靠性。AHP评判结果显示,3个备选区的整体优劣指数依次为0.587 1, 0.212 1, 0.200 8;AHP模型的一致性比例CR值为0.020 3。通过分析和筛选影响远海油气勘探保障建设的选址因子,构建基于AHP原理的选址评价模型,可用于分析评价南海北部岛礁油气勘探保障建设选址的适宜性。  相似文献   

地质灾害威胁下的农村居民点用地适宜性评价——以彭州市银厂沟流域为例     

刘腾  任光明  王猛  余天彬 《中国地质调查》2020,7(2):95-100

目前针对受震灾威胁、地质灾害频发的山地环境下的农村居民点布局研究尚不多见。该文以彭州市龙门山镇银厂沟流域为例,首先在总结分析区内地质灾害发育特征的基础上,基于8项指标进行地质灾害危险性分区; 然后,将地质灾害危险性区划结果作为影响农村居民点用地适宜性评价的首要因素,再结合地形条件、社会经济和生态环境等方面,以地质灾害极高危险区、单体地质灾害危害范围、坡度≥25°和基本农田保护区为限制性条件,构建地质灾害威胁下的农村居民点用地适宜性评价指标体系; 最后,采用模糊综合评价法对彭州市银厂沟流域内居民点用地适宜性进行评价分级。研究结果表明: 高度适宜区占研究区总面积的4.2%,中度适宜区占11.4%,低度适宜区占10.5%,不适宜区占73.8%; 农村居民点用地“适宜”区域主要沿公路分布,并存在多个“块状”集中分布区,这些地区地形平坦,交通条件便利,可为新农村住宅位置的选择提供指导意见。  相似文献   

LA-ICP-MS in situ analyses of the pyrites in Dongyang gold deposit,Southeast China: Implications to the gold mineralization     

《China Geology》2020,3(2):230-246

The Dongyang gold deposit is a newly discovered epithermal deposit in Fujian Province, Southeast China, along the Circum-Pacific metallogenic belt. Herewith, the authors present mineralogical, scanning electron microscope, and laser ablation inductively coupled clasma mass spectrometry analysis to reveal the relations between Au and Te, As, S, Fe, etc., and discuss the gold precipitation process. The pyrites in this deposit are Fe-deficient, and are enriched in Te and As. The authors infer that As was mainly in form of As-complexes, and Te-Au-Ag inclusions/solid solution also exsits in the Py I. Along with the depletion of Te and As, they were less active chemically in the Py II, and Au may be incorporated into As-rich and Fe-deficient surface sites by chemisorption onto As-rich growth surfaces. Because of the incorporation of new fluid, Te and As became the most active chemically in the Py III, which was the main elements precipitation stage, and As dominantly substituted for S in the lattice of pyrite, due to the more reducing condition. The authors propose Au was in form of invisible gold, and the incorporation of gold can be considered as post-pyrite event, while the Au-bearing minerals were result of post incorporation of gold in arsenian pyrite.  相似文献   

盾构机轴线方位角解算原理研究     

薄志义  王坡  张楠 《北京测绘》2006,(3):18-21

以德国VMT公司的TMB制导系统SLS-T为例,主要解析了盾构机轴线方位角测量原理,并完整地推导了盾构机姿态参数公式。由于国外导向系统的核心原理不公开,因此本文的研究成果,为隧道施工工程技术人员深入理解激光导向系统原理以及开发国产的自动导向系统提供了理论基础。  相似文献